Household, rural and aquaculture pumps

Onga

Onga has been moving water around Australasian homes and farms for over sixty years — pressure systems, jet pumps and rainwater controllers built to be lived with rather than babied. We carry the range across household, Farm Master rural and aquaculture duty.

Household Pressure Pumps

Tank and mains pressure systems for the house — from the economical JM through to the variable speed Intellimaster that only draws the power the tap actually needs.

Onga

Intellimaster

Variable speed pressure pump with an LCD display and constant pressure control. Uses markedly less power than a fixed speed pump and runs quieter with it.

750 W – 2.2 kW
Variable speed
ECO SELECT rated

Onga

Multi Evo

Self-priming horizontal multistage centrifugal pump with a high-efficiency hydraulic end and D.R.O.P. dry-run protection. Certified for drinking water.

8 m suction lift
Multistage
AS/NZS 4020

Onga

JS Series

Jet-assisted Homemaster with a stainless steel casing and base, so it survives sitting in the wet spot beside the tank. Loss-of-prime protection on JSP models.

7.6 m suction lift
Stainless casing
Italian built

Onga

JM Series

The economical household pressure system. Moulded corrosion-resistant casing, high suction inlet for easy priming, and a quiet TEFC motor.

7.6 m suction lift
Moulded casing
Thermal overload

Onga

Dominator

Sits down in the tank or well, so the house hears nothing. Stainless body and Signature 2000 internals, paired with a Presscontrol or WaterSwitch for a full pressure system.

57 m max head
94 lpm max flow
Silent in-tank

Onga

Autojet Series

A straightforward automatic pressure system for tank water, with a stainless casing and Press Control fitted. Good for garden and above or below ground tanks.

450 W / 1100 W
46 m max head
77 lpm max flow

Farm Master Rural Pumps

The cast iron jet pumps that have been pulling water out of New Zealand bores, dams and creeks for decades. Injector combinations to suit shallow or deep well, offset or over-bore.

Onga

OJ800 Range

The flagship Onga Jet, supplied complete with a pressure tank. Coated cast iron housing and precision internals — the one to fit when the bore is deep and the duty is daily.

49 m deep well lift
Cast iron
Pressure tank included

Onga

OJ700 Range

Same cast iron Onga Jet build in a bare-pump format for existing tanks and manifolds. Offset injector combinations available.

77 m max head
162 lpm max flow
40 m deep well lift

Onga

JJ600

Junior Jet — compact cast iron with the same injector flexibility as the OJ range, in a size that suits a house on a bore rather than a whole farm.

63 m max head
37 m deep well lift
Cast iron

Onga

JJ400

The smaller Junior Jet, for shallow wells, tanks and modest stock water duty where the JJ600 is more pump than the job needs.

52 m max head
98 lpm max flow
27 m deep well lift

Onga

500 Series

Thermoplastic jet and venturi assisted centrifugal with a built-in check valve. Corrosion-proof where cast iron would not last, and light enough to carry.

41 m max head
118 lpm max flow
Corrosion-proof body

Rainwater & Boosting

The controls that turn a pump into a system — automatic mains changeover for rainwater harvesting, and dual-pump boosting where one pump cannot hold pressure.

Onga

iWaterSwitch

Intelligent rainwater controller that switches between stored rainwater and mains without anyone noticing. Displays live flow, pressure and current, and logs the rainwater you have used.

Automatic changeover
Live flow & pressure
Fits most Onga pumps

Onga

Intellimaster Dual Booster

Two variable speed Intellimasters on a stainless manifold with cascade control — the second pump only joins in when demand calls for it, and start-up alternates to even out the wear.

Twin variable speed
304 stainless manifold
Cascade control

Rainwater to mains changeover
Constant pressure boosting
Dry run protection
Retrofits to most Onga pumps

Submersible & Drainage

Cast iron submersible pumps for pits, sumps and the low corner of the paddock that floods every winter. Vortex impellers so soft solids pass straight through instead of wrapping the shaft.

Onga

VF150 / VF150N

Single phase drainage pump in a cast iron body, designed for clear or grey water carrying some soft solids. Float switch fitted, moisture sealed cable inlet, and a vortex impeller that passes 15 mm without complaint.

350 W
150 lpm · 7 m head
15 mm soft solids

Onga

CSM240 Vortex

Rugged cast iron dewatering pump with a dry motor design, dual mechanical seals in an oil chamber and automatic thermal and mechanical overload cut-out. Built for pits, water treatment circulation, grey water and commercial ponds.

0.4 kW
250 lpm · 10 m head
10 mm free passage

Cast iron pump bodies
Vortex impellers
Float switch fitted
Soft solids handling

Pressure Tanks

A pressure tank is the cheapest way to make a pump last longer. It carries the small draw-offs so the pump is not starting every time someone runs a tap, and it takes the hammer out of the pipework.

Onga

OPT Pressure Tanks

Onga's OPT steel diaphragm tanks, sized for domestic and industrial pressurised water storage. Adding one cuts the start-stop frequency of the pump, which is what usually kills it — and it trims the power bill at the same time.

8 – 100 L
Steel diaphragm
Potable water

8 – 100 litre nominal capacities
Steel diaphragm construction
Suitable for potable water
Water hammer arresting

Aquaculture

Salt water duty is unforgiving. The SeaBass is built for it — sealed, coated and stood up off the corrosive puddle it would otherwise live in.

Onga

SeaBass

Purpose-built aquaculture pump with a salt water mechanical seal, stainless shaft and triple epoxy coated motor, rated for more than eight hours a day continuous.